Sat. May 25th, 2024

Netgear Nighthawk routers are one of the most preferred choices of people. They enable users to access a lightning-fast internet connection in every part of their homes. But, considering they are technical devices, Nighthawk routers are susceptible to various issues. One of them is the constant rebooting of the Nighthawk router. If you are also searching for a reliable solution to fix the issue, we’ve got you covered. Here, we will provide you with a list of several troubleshooting hacks that will help you get rid of the issue in a matter of minutes. Continue reading.

Fixed: Netgear Nighthawk Router Keeps Rebooting

Rebooting has been a versatile solution to fix hardware and software-related technical glitches. But, it can be annoying if rebooting itself becomes a problem. Have a look at the following tricks to resolve the issue:

  1. Check the Power Outlet

First of all, check whether your Netgear Nighthawk router is receiving an adequate power supply or not. This is because an insufficient power supply is one of the major reasons that might be causing your router to reboot.

If your Nighthawk router is not receiving enough power supply, then consider plugging it into another power outlet. If doing so fails to work for you, move to the next troubleshooting trick.

  1. Avoid Overheating

Another reason that might have led you to the ‘Netgear Nighthawk router keeps rebooting’ issue is the heavy files and processor baggage of your router. To get the issue fixed, consider clearing up this baggage as soon as possible.

Proper airflow is also essential to avoid the Netgear router’s overheating. If the flow of air is restricted, your WiFi device won’t be able to operate at a normal temperature. So, make sure to clear the dust on your router.

  1. Update the Firmware

Chances are that your router is running on an outdated firmware version due to which it keeps rebooting. In order to get the issue fixed, update the firmware of your WiFi device by accessing the Nighthawk router login page.

Given below are the steps to update the Netgear router’s firmware:

  • Create a connection between your Nighthawk router and modem using an Ethernet cable.
  • Open a web browser on your PC. Ensure that it is updated and free of cache, cookies, and browsing history.
  • Move the cursor to the address bar of the web browser.
  • Thereafter, type routerlogin.net into it and press the Enter key.
  • Use the default admin details of your Nighthawk router in order to reach the Netgear Genie setup wizard.
  • Navigate to the Maintenance option under the Settings menu.
  • Look for the Firmware Update option.
  • Once found, click it to check if a new firmware version is available for your device.
  • If a new firmware is available, follow the on-screen instructions and complete the Netgear router firmware update process.
  1. Verify the Cable Connections

Check all the cables connected to your Netgear Nighthawk router. Just in case, you find any damaged cable, get it replaced with a new one immediately.

Also, ensure that the cable connections are finger-tight. It will help in escalating your device’s performance.

  1. Relocate Your Router

Improper placement can also result in constant rebooting of your Nighthawk router. Therefore, it is necessary that your router is placed at its ideal location.

To fix the issue, ensure that your Nighthawk router is placed away from thick concrete walls, corners, reflexive surfaces, metal objects, and radio-waves emitting devices.

To Sum Up

This was all about what to do if your Netgear Nighthawk router keeps rebooting constantly. On the off chance, the aforementioned tips failed to help you, consider restoring your Nighthawk router to the factory default settings and reconfiguring it using the 192.168.1.1 IP address.

By Manali

Leave a Reply

Your email address will not be published. Required fields are marked *